COEXIST-ART

Creating quality urban lifestyles, building stronger communities.

General Article

Common Mistakes You Might Be Making When Cleaning Your Windows

Cleaning

If you’re someone who absolutely hates the look and feel of a streaky window, you’re not alone. For office windows and residential windows alike, there’s nothing worse than a pane of glass that just won’t get clean. It can feel like there’s no way to get any Renewal by Andersen looking streak-free and beautiful when you’re using the wrong cleaning products or techniques. Luckily, there are a few ways that can make cleaning your windows way easier, as well as allowing them to stay pristine for longer. If you’re coming up against any of these cleaning mistakes when cleaning your windows, it’s time to start changing your ways.

You’re Cleaning on the Wrong Day

Even though it might seem like common practice to clean windows on a bright sunny day, this can actually lead to a lot of problems in the long run. When the sun is high and bright outside, your windows can end up looking streaky as a result, due to the quick-drying effect of the sun. Cleaning your windows thoroughly requires not just soaking your windows in cleaning fluid, but effectively drying and sponging your windows as well. When the sun is out, it could end up sabotaging the whole process without your even knowing it.

You’re Not Using Enough Cleaner

Your first response to a spate of streaky windows might be to lay off on the Windex. However, sometimes that’s just the problem. If you’re not using enough cleaning solution on your windows to begin with, it could be the cause of dirt and dust buildup leaning to perpetually streaky, dirty-looking windows. If you really want a clean, shining surface, don’t slack on the cleaning fluid. Make sure you spray liberally and really get each area of the surface wet enough to really soak through into the grime buildup before drying.

You’re not Drying the Right Way

Even more important to the cleaning process is doing a good job of drying your windows. It’s not something that can simply be left to nature. If you’re trying to get a streak-free finish, using a soft, non-scratchy material to evenly dry out your window’s surface is hugely important. Using harsher materials like paper towels or coarse sponges can create scratches on your window’s surface, and they’ll make it impossible for you to dry your window evenly. For best results, use a squeegee-like tool that evenly spreads water across each area of the window surface and makes drying simple.

Your Process is Wrong

It might not seem like there’s anyone right way to clean windows. However, there are definitely ways that are better than others. If you’re cleaning your window without going through at least three separate steps, you might be missing out on the only way to get a truly clean surface. The best way to clean is to use a gentle tool and lots of window cleaner on your surface, leave it alone to set, and dry it off with a soft, gentle rag or sponge in quick, even strokes. Always move horizontally, preferably from top to bottom, to get the best possible results.…

Purchasing Land for The Future

People think a lot about their future retirement and what they want to do when they stop working. Many will dream about moving their family to a small cabin in the woods or a cottage on the beach. If this is what you are thinking of, then, you will need to start making your plans of time. Purchasing a parcel of land where you can build your future home is the first step in this plan. Choose the area of the country where you would like to eventually live and contact a real estate agent there. They will put together a list of properties for you to look at. Once you have decided on the piece you want, you can hold on to it for several years. As your retirement comes closer, you will need to find a land development Cincinnati OH firm that can help you put the home of your dreams together. They will put together a package to include whatever you want. If you need more than one dwelling, they can place them on your parcel of land as you wish. They can also plan out the entrance and exit points and any other buildings you may want.

Meeting with Your Contractor

When you first meet with the company you’ve chosen for your project, they will note all of the aspects that you need to develop. It may be as simple as one home with a garage or you could want a home, separate garage and other out buildings. They can place these on your land in strategic locations. You will make the final approvals on all plans and then the work can begin. The contractor will let you know at the onset, how much your plan will cost and how long it will take to do. If you are looking to put multiple buildings on the site, it could be done in stages. They will recommend the best way for you to do it. The company will complete the work as they have promised, and you can then plan your retirement.

Using Land for Your Business

Another aspect of land development is in business. Many companies are choosing to build their own factories and warehouses themselves rather than using existing buildings. They purchase large tracts of land and plan their developments. If it is a private company, they will most likely choose one warehouse and a parking lot. But, there are other companies who develop land as strip malls. These are buildings that are subdivided into individual stores and are quite popular. Businesses have been developing land very rapidly in the recent past.

Whatever you are planning to build or develop, working with a good real estate agent at the beginning is worth it. They can let you know what the land can be used for and how you can go about building. They will have information on permits required and any ordinances that may encumber you during your build. Search the internet for a good real estate agency.

Fun Aspects of Having a New York City Mailing Address

New York City is a huge city that provides an incredible backdrop of successful businesses from around the world. You can tap into this energy with your business, even if you are planning to stay in a location many miles away.

Place Your Operation In the Heart of Big Business

A home operated business can be run from nearly any location on earth. Renting a private mailbox will allow you to use a particular stationary address that is separate from your home. This offers you added security and privacy. You can take advantage of this feature and level up by placing your business in the center of one of the most dynamic cities of industry and business, NYC.

Forward Mail to Your Home Address

All of your business mail can be forwarded to you on request. Every piece received in your name will be forwarded to the specified address in a timely fashion. You will always be on top of your business dealings.

Forward Mail Throughout the World

This is the perfect mailing solution for those that travel frequently with their business. You can mail forwarded to any location on the planet that accepts mail. This provides complete freedom to any business owner. It is the perfect solution for those that are not able to create an exact home base due to the nature of the business.

Keep NYC as Your Business Base

Being a business world traveler is not a problem when you have a trustworthy place to have all of your business correspondence and packages sent. You have the option to affordably keep NYC as your business base as you travel the United States or the globe expanding your business.

Impress Your Clients Without the Cost of an Expensive Office

Handing out business cards that state a business address in NYC is impressive to nearly any client. You can do this without incurring the expense of a New York City office, which can be incredibly high. You get all of the benefits with no drawbacks. It is a win-win situation for you and your business.

Contact business mail specialists like Fulfillment Services USA and find out more about New York City mail forwarding services today!

 …

6 Things You Should Never Throw In the Dryer

The warnings are always given about the items you should never throw in the dryer, but every once in a while an item slides through and seems to survive without a terrible event unfolding. It may have been a case of pure luck that you were not left scraping the sides of the dryer drum clean, or tossing out hundreds of dollars in clothes ruined by chemical melting. Below are six things that you need to avoid throwing in the dryer at all cost.

Plastic Items or Items With Plastic Parts

Raincoats with vinyl patches, pajamas, and jackets with plastic zippers and shirts with fake baubles and beads should never hit the dryer. The plastic parts are subject to melting and ruining every clothing item you have along with the items in question. You may end up spending hours cleaning up that sort of mess.

Tennis Shoes

You should never put tennis shoes in the dryer due to the materials that comprise the souls. It is often a type of rubber or plastic and can melt in high heat. The shoes can kick the dryer door open enough that your energy efficiency goes down the drain, without being enough to stop the unit from turning.

Suede Leather

Suede leather that is thrown int eh dryer will result in a product that is hard, crumbly or turns a very odd color compared to the original. Suede leather should be placed on a flat surface in a safe area and allowed to air dry slowly. The results will be much more pleasant.

Delicates Like Lace

Delicate fabrics like lace should be air dried individually. Placing them in a pile of clothes in a dryer can cause them to become entangled and tear. Buttons, clasps and other enclosure devices on these clothes can grab ahold of the delicate fabric and cause tears. It is not worth taking the risk in the dryer.

Rayon or Spandex

Rayon and spandex are not materials that respond well to being placed in the dryer for any length of time. Rayon products will shrink in such a way that they are not salvageable. Spandex can actually weaken and disintegrate. It contains rubberized materials that begin to melt with high heat. These are both materials that should be air dried only.

Contact experts like Sub Zero Service Center for Sub Zero maintenance Miami Beach for all of your dryer repairs today!…

Three Tips to Keep Your Custom Fence Looking Beautiful

Building your custom fence can almost feel like a dream come true. Your yard will surely impress your friends and neighbors this summer once everything has been built. People will ask about the master craftsmanship that went into creating your fence. However, your fence can be ruined if you don’t know how to properly take care of it. The weather, accidents, and even insects can destroy your fence if you don’t take care of it. Not performing maintenance can be incredibly detrimental.

Fortunately, we have some tips that you can use to keep your custom fences Chatham NJ looking beautiful. You want to be prepared, no matter what the situation is. Here are 3 tips you can use to keep your fence looking fantastic, no matter what time of year it is.

Wood Rot and Termite Prevention

All wood rots at some point or another. Although decomposition is a natural process, chemicals designed by wood manufacturing professionals are utilized to ensure the wood lasts much longer. However, these chemicals can wear off over time, which can speed up your fence’s decomposing process. This can lead to costly repairs if you don’t take preventive measures.

The real enemy here is termites. They will burrow inside of rotting wood posts and make termite nests, which are incredibly detrimental to your fence and house. Do yourself the favor and apply regular treatments to your fence, either by yourself or a professional. Termites are hard to get rid of once they make their home inside of your fence. Don’t wait until they’ve already gotten comfortable.

Power Washing

Even if you apply treatment to your fence, certain parts will begin to decay over time. One of the best ways to strip the bad parts of the fence is to use a power washer. This will remove the dead wood and reveal the vibrant parts underneath. Scraping off parts can do damage to the good parts of the fence, which is why power washing is a safer alternative.

Prevent Debris from Falling

If you have any trees that are nearby your fence, chances are there are limbs that can potentially fall on it. Storms happen all the time, and all it takes is one strong gust to knock down a loose branch that will cause severe damage to your fence. Take preventive measures and make sure to keep your trees trimmed regularly. This is especially true for parts of the tree that look like they may fall off at any time.

Maintenance is the mandatory aspect in all parts of our lives. Making sure that our custom fence is taken care of just a part of the process. Use these tips to make sure that your fence is secure at all times of the year so that you won’t have to spend large amounts of money for damages that could’ve been prevented. Your friends will commend you for a fantastic job that you have done keeping your yard looking beautiful.

How to Cut MelaWood

MelaWood is PG Bison’s leading brand of decorative melamine faced board and is popular because it is easy to use, looks good and offers great strength and durability. It is basically a 16mm thick piece of chipboard and each flat side is covered with a melamine layer in one of four different finishes – Peen, Ashwood, Linear, and Natural Touch. One thing DIY-ers struggle with however is getting the perfect edge when cutting it with either a table saw or a circular saw.

When the cutting is done professionally, typically at a cut and edge factory, you will notice that the material has a perfectly cut edge as compared to an amateur’s attempts. This is because professional panel saws use two blades in order to cut the board. First, a smaller blade cuts a groove all along the bottom and on the cutline. This ensures that the main circular blade doesn’t chip the edge as it breaks through the bottom of the material while making a cut.

You can achieve the same or similar quality with immense care and precision. For instance to reduce the damage, cut slowly and make sure you use a sharp fine tooth blade. To eliminate the chipping, first draw where the cut should be and then score a line at the top and bottom of the material with a sharp blade.

Another alternative is to set the depth on your saw to about 3mm. Cut on the line and then turn the material over and cut again – this time at full depth. This method is only advisable if you use a table saw. It will be difficult the cut precisely on the same line using only a circular saw.

Using power tools such as table and circular saws is highly dangerous. Always wear the necessary personal protective gear when using these tools. Pursue the perfect cut!

 …

Best Fence Designs in Queens

Home owners in the New York City area want to learn more about fences that can add a level of security that people desire. Research wrought iron fence Queens NY at the next opportunity. People have requested these fence models for quite some time. The supplier is ready to ship a fence model straight to the home when possible that can be installed in no time. They can explain the advantages of each fence design now being installed. There are important details that people need to know. 

Scope Out Great Fence Designs


A catalog can showcase the best fence design to install as is needed. People want to give these fences a try on their own. They can do the preliminary research for themselves when they get a chance. The fence design is worthwhile and that could help people choose the best model on the market. Iron is a sturdy material and can stand up to cold winter temperatures. The winter weather is one consideration when choosing a supplier. These designs are worthwhile and that is valuable for many reasons. 

Choose the Right Dimensions


Iron fence models are in high demand for many reasons. People want to get the work done and improve the security around their household. The house will be safe against a lot of potential threats. The fence could also be used to keep vehicles safe or dogs contained in the yard. That is worthwhile for anyone who wants to improve their household setting in time. Think about the great benefits people can choose when they use the fence structure. That will change the way that fences are being designed in various ways as well. 

Reviews for Products


The iron fence is worthwhile, and people want to learn how that will work. These reviews shed a little light on the important details for those that are interested. Products will be considered and requested by a lot of people in the city. They have voiced their opinion and that could be a difference maker for a lot of people. Think about the upcoming purchase and what steps need to be made. Products will help people add to the relative security of the household. Write new reviews in support of these wrought iron fences. 

Pay the Price for Fences


Iron is relatively cheap, but there is a lot of material to request. The supplier has expertise and other advantages on their side too. The price tag will help people learn a lot more about the all the details to consider. These fences will add to the relative value and safety of a household. That makes the purchase worthwhile for a lot of good reasons. People will want to take the order process with all due considerations. There will be shipping and handling fees that might apply to get your wrought iron shipped sooner.